I tried various thicknesses of ink, applied with a roller, and various different tools to draw both through paper (which lifts off ground) and directly (which displaces it). I tried drawing on the plate as soon as it was coated, then at 10 minute intervals as the ink dried. Unlike my previous attempts with a different acrylic soft ground, this ink seems to dry quite slowly giving a large window of opportunity for drawing... top image drawn through paper after 5 mins, bottom drawn after 35 mins...
I also tried painting with various consistencies of the ink directly on the un-coated plate, and used water to dissolve parts creating the opposite effect...
I didn't get chance to etch the plates as the ink takes up to 24 hours to dry depending on thickness, but I can't wait to see what they all turn out like as it feels quite promising. Now I've just got to work out the etching times...
P.S. I like the little mono prints made with the removed ink too :)
6 comments:
Love the results, can't wait to see a print. Why is melting wax toxic Sarah?
Hi Jack, good question, it's more about the solvents you have to use to remove the wax from the plate (turps etc). Also there we don't have hot plates in the workshop to reduce the risk of burned students!
Thanks Sarah
I have heard that the fumes from the wax if you heat it too much can also be toxic. I use wax in my drawing and painting being careful to work in a well ventilated space and not letting the wax smoke.
Sounds like you're being pretty safe, which is good! It's a toxic world we live in isn't it :)
nice prints...
Beautiful, as everything you create. Bravo:)
Post a Comment